Introduction |
|
Feature |
|
Specification |
|
Where to buy |
|
Catalog |
|
Overview
The NPPort is the most compact, integrated solution available to PoE-enable any device with an standard rj45 connector. By simply adding NPPort to a product design, device manufacturers cut their design cycle by as much as 80% and are able to offer PoE Ethernet connectivity in record time.
The NPPort offers the highest level of integration available in a device server. Within a compact RJ45 package is a 10/100 Ethernet transceiver, and status/diagnostic LEDs. In the space that is normally consumed by a connector, the NPPort provides a complete PoE networking interface.
NPPort is designed to provide power supply for networking devices, such as a CCTV, WLAN access point, VoIP or IP Cameras. It removes the need to access to main or external plug-top power supply.
This unit support separating power and data from any PoE enabled Ethernet via the standard Cat.5 cable. And this is the cost effective solution for embedded networking products which need support PoE
Key Features
• IEEE802.3af compliant
• Compact RJ45 package
• Highly efficient DC/DC converter
• Low output ripple and noise
• Wide Input voltage range
• Overload and short-circuit
protection
• Adjustable Output
• 1500V isolation (input to output)
• Simple integration
Ideal application
• IP Camera
• VoIP phones
• Ethernet converters
• Biometric scanners
• RFID readers
• Door entry systems
• WiFi Access Points
• Point of Sale terminals
• Thin Client
• Industrial networking controllers
Specification:
The NPPort is the most compact, integrated solution available to PoE-enable any device with an standard rj45 connector. By simply adding NPPort to a product design, device manufacturers cut their design cycle by as much as 80% and are able to offer PoE Ethernet connectivity in record time.
The NPPort offers the highest level of integration available in a device server. Within a compact RJ45 package is a 10/100 Ethernet transceiver, and status/diagnostic LEDs. In the space that is normally consumed by a connector, the NPPort provides a complete PoE networking interface.
NPPort is designed to provide power supply for networking devices, such as a CCTV, WLAN access point, VoIP or IP Cameras. It removes the need to access to main or external plug-top power supply.
This unit support separating power and data from any PoE enabled Ethernet via the standard Cat.5 cable. And this is the cost effective solution for embedded networking products which need support PoE
Pin Description
Signal
Name
|
Pin
|
Function
|
GND
|
1
|
Circuit Ground
|
Vcc
|
2
|
+3.3V Power In
|
Reset (In)
|
3
|
External Reset In
|
Data OUT
|
4
|
Serial Data Out
|
Data IN
|
5
|
Serial Data In
|
CP1
|
|
CP1 can be configured as follows:
• Flow control: RTS (Request to Send)
|
CP2eddsdfsdf
|
7sdfsdf
|
CP2 can be configured as follows:
|
CP3
|
8
|
CP3 can be configured as follows:
• Flow control: CTS (Clear to Send)
ntroller, Transmit output enable
|
|
|
|
You can directly purchase the NeBoard series from conextop or your local service provider.
Please contact us or your local service provider for detailed models.
Caution: the above catalog is just summary, not the most detailed models, please contact us for the most detailed catalogs.
|